The Fury Hydraulic Setting Tool is designed to set bridge plugs, cement retainers and packers using the work string, production tubing or coil tubing. No rotation is required making it suitable for coil tubing and horizontal applications. Circulate ball down to Fury HST, apply required pressure from the surface and disconnect. The tubing will automatically drain coming out of the hole. The Fury requires 3,482 PSI at the tool to shear a 50,000 pound stud (7″ & larger casing). A lower disconnect pressure (PSI) can be obtained by adding a 3-stage conversion kit. This will reduce your pressure to 2,321 PSI at the tool to shear the same 50,000 pound shear stud. The Fury HST accepts most wireline adapter kits commonly used on a Baker No. 20 Wireline Pressure Setting Tools.
For information or assistance regarding our full line of Fury Hydraulic Setting Tools contact your Alpha Oil Tools representative and reference your inquiry with the following information.
Fury 5 | 1.750 OD | (part number 060-1750-200) |
Fury 10 | 2.750 OD | (part number 060-2750-200) |
Fury 20 | 3.812 OD | (part number 060-3812-200) |
Alpha Fury 5 Technical Manual (PDF)
Alpha Fury 10 Technical Manual (PDF)
Alpha Fury 20 Technical Manual (PDF)
FOR MORE INFORMATION
Sales or RFQ: Sales@AlphaOilTools.com
International Sales: InternationalSales@AlphaOilTools.com
Field Support Questions: FieldSupport@AlphaOilTools.com
Engineering Support: Engineering@AlphaOilTools.com
General Inquiries: Contact Us